BLXWH - ITUF HYDROCARB EPOXY RED, KHA303
- MSDS: BLXWH
- Manufacturer: INTERNATIONAL PAINT INC
- Product Name: ITUF HYDROCARB EPOXY RED, KHA303
- National Stock Number: 8010-00N021290
Product Identification
Product ID:ITUF HYDROCARB EPOXY RED, KHA303
MSDS Date:10/17/1988
FSC:8010
NIIN:00N021290
MSDS Number: BLXWH
Responsible Party
US
Emergency Phone: 713-682-1711
Info Phone: 713-682-1711
Cage: 26351
Contractor
Telephone: 800-589-1267/800-854-6813
Cage: 26351
Ingredients
NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:CAN CAUSE IRRITATION WITH REDNESS,
TEARING AND BLURRED VISION. SKIN:IRRITATING. MAY RESULT IN
DERMATITIS. MAY CAUSE SENSITIZATION OR OTHER ALLERGIC RESPONSES.
INHAL:MAY CAUSE IRRITATION. INGEST:MA Y CAUSE GI IRRITATION.
CHRONIC OVEREXPOSURE TO, AND MISUSE OF SOLVENTS HAS BEEN LINKED TO
PERMANENT (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:BRAIN AND NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.
First Aid
First Aid:EYE:FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF WATER FOR AT
LEAST 15 MINUTES. GET MD IMMEDIATELY. SKIN: REMOVE CONTAMINATED
CLOTHING. WASH SKIN WITH PLENTY OF SOAP & WATER. LAUNDER CLOTHES
BEFORE RE USE. INHAL:REMOVE TO FRESH AIR. GIVE ARTIFICIAL
RESPIRATION IF NEEDED. GET MD. INGEST:CALL MD IMMEDIATELY TO
DETERMINE WHETHER OR NOT TO INDUCE VOMITING.
Fire Fighting
Flash Point:100F,38C
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:SMOTHER FLAMES W/EXTING MEDIA. WATER MAY BE
USED TO COOL UNOPENED CNTNRS BUT MUST NOT BE USED AS EXTING AGENT.
CARE TO PVNT SPREAD OF BURNING LIQ W/ (SUPP DATA)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK/OPEN FLAME PRESENT. CLOSED CONTAINERS MAY EXPLODE
WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN BUILDING DESIGNED & PROT FOR
STORAGE OF NFPA CLASS II LIQUIDS. AVOID BRTHG DUST OR CHIPS FROM
SANDING/ BLASTING SURFACES COATED WITH PRODUCT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:ALL RESPS MUST BE NIOSH/MSHA APPRVD. IN OUTDOOR
OR OPEN AREAS, W/UNRESTRICTED VENT, USE FILTER RESP TO REMOVE SOLID
AIR-BORNE PARTICLES OF OVERSPRAY DURING SPRAY APPLIC. IN RESTRICTED
VENT AREAS, USE RESP I/A/W 29 CFR 1910.134 TO(SUPP DATA)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOLUME & PATTERN TO KEEP TLV &
LEL OF HAZ INGREDS BELOW LIMITS SPECIFIED, & TO (SUPP DATA)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOG W/FULL LENGTH FSHLD
Other Protective Equipment:IMPERVIOUS CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:WATER. CLOSED CONTAINERS MAY EXPLODE WHEN EXOSED TO
EXTREME HEAT. WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . RESP PROT:REMOVE A COMBINATION OF PARTICULATES AND
VAPORS. VENT:REMOVE DECOMPOSITION PRODUCTS DURING WELDING OR FLAME
CUTTING OR SURFACES COATED WITH THIS PRODUCT.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:300F,149C
Vapor Density:HVR/AIR
Spec Gravity:1.47
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:20(WT)
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:DIRECT HEAT, FLAME OR SPARK.
Hazardous Decomposition Products:CO, CO2, VARIOUS HYDROCARBON
FRAGMENTS, ALDEHYDES.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.